Wednesday, November 27, 2013

Personalised Gift Bags featuring X-Press IT Double Sided Sheets

Hi Anne here today to share with you a really simple way of personalising gift bags, to give them that little something extra in this gift giving season.

I have found some simple Kraft gift bags, and have decorated them.  Here is how.

Taking your X-Press IT Double Sided Sheets, remove one side and adhere to your Patterned Paper.  This stuff is totally FABULOUS as it is like a GIANT piece of double sided tape.  It made my bag decorating process super easy.

I have used a 2" and 1" circle punch and easily punched out some quick circles.

Remove the other side of the doubled sided sheet, and adhere in place on the bag.

Using my X-Press it Thick Glue Pen, I drew some bows on the top of the circles.  Then sprinkled glitter onto the glue.

 There are two ways you can add the string.  The quick method, using a brown pen....

But as you know, I can't go past a good bit of needle work (which I have done on my other sample).

Products I have used in my project are:

X-Press It Double-Sided Sheets 
X-Press It Glue Marker
FabScraps Birds and Bees

Extra products:
Green Kraft Bags
Brown pen or Green DMC Thread

So here they are, the finished gift bags.

Hope you liked my super easy bags and see that you could whip up a dozen of these in a very short time.  Thanks for Looking

Pin It

Wednesday, November 13, 2013

Angelic Christmas Layout

Sharmaine here with a layout featuring the Angelic Christmas range from Fabscraps 


Products used:
FabScraps “Angelic Christmas” papers
FabScraps “Angelic Christmas” chipboard
Lindy’s Stamp Gang Embossing Powder
X-Press It Double sided tape
X-Press It Foam tape
Fabscraps pearls

After choosing my background paper (“Special Times”)
I pulled out a snowflake chipboard piece


Using some double sided tape I adhered the chipboard to an acrylic block


And stamped the image on my paper,
then embossing it with some “Silver Moon Sapphire” embossing powder.


I then reused the chipboard


By covering them with some paint, red


and white,


And then added some sparkle with gold nail polish.


While this was drying I ripped a strip of paper from a piece of “”Blessed Times 1”


And using this ripped shape as my guide I ripped slightly larger pieces from “Bauble Delight” and “I Believe”


Once these were added to my page I stuck on the chipboard snowflake, to which I had spotted some snow (white nail polish).


I then had fun colouring another piece of chipboard “Merry Christmas”.


Adding more sparkle to my page.


The end result…


A happy little reminder of Christmas time.
Isn’t the print on the pattern paper just gorgeous!
Dreamy even?!
I hope this post might inspire you to have fun creating.
Take care

Pin It

Wednesday, November 6, 2013

Blog Hop Winners

First of all, we'd like to say a big THANK YOU to everyone who participated in the X-Press It Blog Hop...

The lucky 8 winners are:

X-Press It Blog #1 - Kerry From The Beautiful Barossa Valley
X-Press It Blog #2 - Jo Murray
X-Press It Facebook - Philipa Chang
X-Press It Instagram - Pipsicle007
Edna's Blog - Angie Brown
Sharmaine's Blog - Morgyn Mlinarek
Kate's Blog - Sammi
Anne's Blog - Jenny G

Please send an email to with your postal details so we can send your TREATS!!Pin It

Vintage Glam TripleTac Style

Welcome to another X-Press It Tutorial, this week we are focusing on the use of TripleTac to transfer images to canvas.  Here is what I started with for the photo transfer element of this piece:

I used a fashion photo for my canvas by the very vintage-ly talented karen radkai, it spoke glamour to me, and I knew the muted tones would work well once transferred, and mesh nicely with a good splash of glitter.

You can print off any photo that you have and use the image transfer technique to achieve the same look.  There is a little video on the image transfer technique at this link, and the instructions are also provided on the side of the packaging on each tub of X-Press It TripleTac Glue.

The first step in the image transfer technique is to apply X-Press It TripleTac Glue to the image, apply a good coverage of TripleTac Glue, all the way to the edges of the image, and then simply press the image, face side down, onto the canvas.  Make sure the glue and image makes good contact with the canvas by running your hands across the top of the covered canvas and pressing firmly as you go.

The next step involves an overnight wait, or 3 hours in a warm environment... or you can do what I do and dry it with a heat gun.  The aim is to ensure that all the moisture leaves the glue.  Once you are confident that the glue has dried it is time to reveal the image...  This is simply achieved by taking the same paint brush, but dipped in water, and wetting sections of the covered canvas, then using your fingers to rub the paper backing away from the image.  It is best to work in small areas, re-wetting the areas as you move along, and slowly removing the backing paper.

Once you have revealed your image, which will be in reverse to what you printed, leave to dry for a while, once dry you will be able to determine if you have removed all, or enough of the backing paper. The amount of backing paper you remove is totally up to you, the more you leave on the more shabby chic your end result will be.

I chose this image with the intent of gifting a little "It's OK to be Glamorous" Canvas to a fashionista friend, and also because it had some specific details that would take extra bits of glam.  I wanted to feature the necklace and chose some silver beads from very deep in my crafting stash, applying a pool of TripleTac Glue directly atop the outline of the necklace on the image, then it was as simple as pooling the beads on top, waiting a few moments for them to settle and then tipping the canvas upside down to remove the excess.  TripleTac is super strong, so the beads will stay in place forever more!

Then for a little bit of different texture I took two different sizes in the Glue Marker and Glue Pen to the front of the dress, adding a thicker line across the top, and dots of glue on the frills on the front of the dress, spilling glitter glass in this section to adhere to the two different sizes of glue...

A quick quote printed and cut up to add a touch of sentiment and the elements of this were finished... you will note that I have painted the sides grey first, and then covered with silver paint, extending some of the paint to the front of the canvas to continue the shabby feel.

You can leave the canvas as is, in this case I wanted a gloss finish, so have gone back over the entire surface with TripleTac Glue, which now serves the purpose of a sealer.  This leaves a glossier finish, and also allows some of the colour from the original image to deepen again.

You could use your own photos, magazine images or scrapbook paper to transfer onto such canvases, the results are endless!

Here is what I used in my tutorial today:
X-Press It TripleTac Glue
X-Press It Glue Marker
X-Press It Glue Pen
X-Press It Canvas

Have fun with this technique, dig deep in the stash and see what you can find to secure with the amazing X-Press It TripleTac Glue and Glue Markers!

Thanks for tuning in, Edna.

Pin It